feedback
Rate this webpage
Need
Support?

NCP1249: PWM Controller Featuring Peak Power Excursion and HV Startup

Datasheet: High-Voltage Current-Mode PWM Controller Featuring Peak Power Excursion and Extremely Low Stand-by Power Consumption
Rev. 2 (1058.0kB)
Product Overview
»View Reliability Data
»View Material Composition
» Product Change Notification
The NCP1249 is a highly integrated high-voltage PWM controller capable of delivering a rugged and high performance offline power supply with extremely low no-load consumption. With a supply range up to 30 V, the controller hosts a jittered 65-kHz switching circuitry operated in peak current mode control. When the power on the secondary side starts to decrease, the controller automatically folds back its switching frequency down to a minimum level of 26 kHz. As the power further goes down, the part enters skip cycle while freezing the peak current setpoint.

To help build rugged converters, the controller features several key protective features: an internal brown-out, a non-dissipative Over Power Protection for a constant maximum output current regardless of the input voltage and two latched over voltage protection inputs - either through a dedicated pin or via the Vcc input.

The controller architecture is arranged to authorize a transient peak power excursion when the peak current hits the limit. At this point, the switching frequency is increased from 65 kHz to 130 kHz until the peak requirement disappears. The timer duration is then modulated as the converter crosses a peak power excursion mode (long) or undergoes a short circuit (short).

Similar to NCP1255 & NCP1254 with integrated HV Startup
NCP1249 has Active ON (A&B) and Active OFF (C&D) versions.
Features   Benefits
     
  • Integrated High Voltage startup
 
  • Provides lossless start-up sequence
  • 65kHz operating frequency with 130kHz Frequency Excursion
 
  • Allows for a high peak power delivery without increasing the transformer size
  • Internal and Adjustable Over Power Protection (OPP) Circuit
 
  • Compensates peak current for changing line conditions
  • Adjustable Brown-Out Protection
 
  • Protects against drops in AC line input voltage
  • Frequency Foldback down to 26 kHz and Skip-cycle in light load conditions
 
  • Optimized efficiency across the entire power range
  • Adjustable Timer-based Auto-recovery Overload/Short-circuit protection with 100% to 25% timer reduction for short-circuit faults
 
  • Robust protection against both overload and short circuit conditions
  • Frequency Jittering in Normal and Frequency Foldback Modes
 
  • Softened EMI signature
  • Latch Input
 
  • Flexible input can be used for OVP or OTP protection
  • Double Vcc hiccup in fault mode
 
  • Reduced average power during fault mode
Applications   End Products
  • Ac-Dc Adapters
 
  • Notebook Adapters
  • Printer Power Supplies
Technical Documentation & Design Resources
Data Sheets (1) Conformance Reports (2)
Package Drawings (1)  
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
NCP1249AD65R2G Last Shipments
Pb-free
Halide free
NCP1249, PWM Controller Featuring Peak Power Excursion and HV Startup (ActiveON) SOIC-9 NB 751BP 1 260 Tape and Reel 2500  
NCP1249BD65R2G Last Shipments
Pb-free
Halide free
NCP1249, PWM Controller Featuring Peak Power Excursion and HV Startup (ActiveON) SOIC-9 NB 751BP 1 260 Tape and Reel 2500  
NCP1249CD65R2G Last Shipments
Pb-free
Halide free
NCP1249, PWM Controller Featuring Peak Power Excursion and HV Startup (ActiveOFF) SOIC-9 NB 751BP 1 260 Tape and Reel 2500  
NCP1249DD65R2G Last Shipments
Pb-free
Halide free
NCP1249, PWM Controller Featuring Peak Power Excursion and HV Startup (ActiveOFF) SOIC-9 NB 751BP 1 260 Tape and Reel 2500  
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Case Outlines
751BP   
NCP1249: PWM Controller Featuring Peak Power Excursion and HV Startup
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.