feedback
Rate this webpage
Need
Support?

FAN53202: FAN53202 5 A, 2.4 MHz, Digitally Programmable TinyBuck® Regulator

Datasheet: 5 A, 2.4 MHz, Digitally Programmable TinyBuck® Regulator
Rev. 1 (2512kB)
Product Overview
»View Reliability Data
»View Material Composition
» Product Change Notification
The FAN53202 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5 V to 5.5 V. The output voltage is programmed through an I2C interface capable of operating up to 3.4 MHz.
Using a proprietary architecture with synchronous rectification, the FAN53202 is capable of delivering 5 A continuous at over 80% efficiency, while maintaining over 80% efficiency at load currents as low as 10 mA. The device can also support a 7 A 500 ms pulse. The regulator operates at a nominal fixed frequency of 2.4 MHz, which reduces the value of the external components to 330 nH for the inductor and as low as 22 µF for the output capacitor. Additional output capacitance can be added to improve regulation during load transients without affecting stability. Inductance up to 1.2 µH may be used with additional output capacitance.
At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate in Power-Save Mode with a typical quiescent current of 60 µA. Even with such a low quiescent current, the part exhibits excellent transient response during large load swings. At higher loads, the system automatically switches to fixed-frequency control, operating at 2.4 MHz. In Shutdown Mode, the supply current drops below 1 µA, reducing power consumption. PFM Mode can be disabled if constant frequency is desired. The FAN53202 is available in a 20-bump, 1.6 x 2 mm, WLCSP.
Features
 
  • Up to 91% Efficiency
  • Quiescent Current in PFM Mode: 60 µA (Typical)
  • Digitally Programmable Output Voltage:
  • 0.6-1.3875 V in 12.5 mV Steps
  • Best-in-Class Load Transient
  • Continuous Output Current Capability: 5 A
  • 2.5 V to 5.5 V Input Voltage Range
  • Programmable Slew Rate for Voltage Transitions
  • Fixed-Frequency Operation: 2.4 MHz
  • I2C-Compatible Interface Up to 3.4 Mbps
  • Internal Soft-Start
  • Input Under-Voltage Lockout (UVLO)
  • Thermal Shutdown and Overload Protection
  • 20-Bump Wafer-Level Chip Scale Package (WLCSP)
Technical Documentation & Design Resources
Data Sheets (1) Package Drawings (1)
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
FAN53202UC23X Obsolete
Pb-free
Halide free
FAN53202 WLCSP-20 567SH 1 260 Tape and Reel 3000  
Market Leadtime (weeks) : Contact Factory
Case Outlines
567SH   
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.