FSL206MR: 650V Integrated Power Switch with Line UVP and no bias winding for 7Watt offline flyback converters
|
|
»View Reliability Data
»View Material Composition » Product Change Notification |
The FSL206MR integrates a Pulse Width Modulator (PWM) and SenseFET is specifically designed for high-performance offline Switch Mode Power Supplies (SMPS) while minimizing external components. This device integrates high-voltage power regulators that combine an avalanche-rugged SenseFET with a current mode PWM control block.
The integrated PWM controller includes: a 7.8V regulator, eliminating the need for an auxilliary bias winding; Under-Voltage Lockout (UVLO) Protection; Leading-Edge Blanking (LEB); an optimized gate turn-on/turn-off driver; EMI attenuator; Thermal Shutdown (TSD) protection; temperature- compensated precision current sources for loop compensation; soft-start during startup; and fault-protection circuitry such as Overload Protection (OLP), Over-Voltage Protection (OVP), Abnormal Over- Current Protection (AOCP) and Line Under-Voltage Protection (LUVP).
The internal high-voltage startup switch and the Burst-Mode operation with very low operating current reduce the power loss in Standby Mode. As a result, it is possible to reach a power loss of 150mW with no bias winding and 25mW (for FSL206MR) or 30mW (for FSL206MRBN) with a bias winding under no-load conditions when the input voltage is 265VAC.
The integrated PWM controller includes: a 7.8V regulator, eliminating the need for an auxilliary bias winding; Under-Voltage Lockout (UVLO) Protection; Leading-Edge Blanking (LEB); an optimized gate turn-on/turn-off driver; EMI attenuator; Thermal Shutdown (TSD) protection; temperature- compensated precision current sources for loop compensation; soft-start during startup; and fault-protection circuitry such as Overload Protection (OLP), Over-Voltage Protection (OVP), Abnormal Over- Current Protection (AOCP) and Line Under-Voltage Protection (LUVP).
The internal high-voltage startup switch and the Burst-Mode operation with very low operating current reduce the power loss in Standby Mode. As a result, it is possible to reach a power loss of 150mW with no bias winding and 25mW (for FSL206MR) or 30mW (for FSL206MRBN) with a bias winding under no-load conditions when the input voltage is 265VAC.
| Features | |
|---|---|
|
|
|
|
|
| Applications |
|---|
|
Technical Documentation & Design Resources
| Design & Development Tools (1) | Package Drawings (2) |
| Application Notes (6) | Evaluation Board Documents (1) |
| Data Sheets (1) | Simplis Models (1) |
Evaluation/Development Tool Information
| Product | Status | Compliance | Short Description | Action | |
|---|---|---|---|---|---|
| FEBFSL206MRN-H428V1-GEVB | Active |
|
Integrated Controller FSL206MRN 5W Auxiliary Power Supply |
|
Availability & Samples
|
Specifications
|
|
|
|
|
|
|
|
|
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Case Outline |
|
|
|
|
|||||||||||||
| FSL206MRBN | Active |
|
FSL206MR | PDIP-8 | 646CN | NA | Tube | 3000 | $0.3733
|
|||||||||
| FSL206MRL | Obsolete |
|
FSL206MR | PDIP-8 GW | 3 | 250 | Tube | 3000 | ||||||||||
| FSL206MRLX | Active |
|
FSL206MR | PDIP-8 GW | 3 | 250 | Tape and Reel | 1000 | $0.4471 | |||||||||
| FSL206MRN | Active |
|
FSL206MR | PDIP-8 | 646CM | NA | Tube | 3000 | $0.4332
|
|||||||||
| Market Leadtime (weeks) | : | Contact Factory |
| Market Leadtime (weeks) | : | Contact Factory |
| Market Leadtime (weeks) | : | Contact Factory |
| Market Leadtime (weeks) | : | Contact Factory |
Product
Description
Pricing ($/Unit)
Compliance
Status
Control Mode
fsw Typ (kHz)
fJitter Typ (%)
Stand-by Mode
RDS(ON) Typ (Ω)
V(BR)DSS Max (V)
IPeak (mA)
HV Start-up Min (V)
DSS (mA)
UVLO
Short Circuit Protection
Over Power Compensation
Brown-out
Latch
Package Type
FSL206MRBN
$0.3733
Pb
A
H
P
Active
Current Mode
67
14
650
600
Yes
1.9
Yes
Yes
Yes
No
PDIP-8
FSL206MRLX
$0.4471
Pb
A
H
P
Active
Current Mode
67
14
650
600
Yes
1.9
Yes
Yes
Yes
No
PDIP-8 GW
| Support |