feedback
Rate this webpage
Need
Support?

NCP1230: PWM Controller, Fixed Frequency, Current Mode

Datasheet: PWM Controller, Fixed Frequency, Current Mode
Rev. 12 (236kB)
Product Overview
»View Reliability Data
»View Material Composition
» Product Change Notification
The NCP1230 represents a major leap towards achieving low standby power in medium-to-high power Switched-Mode Power Supplies such as notebook adapters, off-line battery chargers and consumer electronics equipment. Housed in a compact 8-pin package (SO-8 or PDIP-7), the NCP1230 contains all needed control functionality to build a rugged and efficient power supply. The NCP1230 is a current mode controller with internal ramp compensation. Among the unique features offered by the NCP1230 is an event management scheme that can disable the front-end PFC circuit during standby, thus reducing the no load power consumption. The NCP1230 itself goes into cycle skipping at light loads while limiting peak current (to 25% of nominal peak) so that no acoustic noise is generated. The NCP1230 has a high-voltage start-up circuit that eliminates external components and reduces power consumption. The NCP1230 also features an internal latching function that can be used for OVP protection. This latch is triggered by pulling the CS pin above 3.0 V and can only be reset by pulling VCC to ground. True overload protection, internal 2.5 ms soft start, internal leading edge blanking, internal frequency dithering for low EMI are some of the other important features offered by the NCP1230.
Features
 
  • Current−Mode Operation with Internal Ramp Compensation
  • Internal High−Voltage Start−Up Current Source for Loss Less Start−Up
  • Extremely Low No−Load Standby Power
  • Skip−Cycle Capability at Low Peak Currents
  • Direct Connection to PFC Controller for Improved No−Load Standby Power
  • Internal 2.5 ms Soft Start
  • Internal Leading Edge Blanking
  • Latched Primary Overcurrent and Overvoltage Protection
  • Short−Circuit Protection Independent of Auxiliary Level
  • Internal Frequency Jittering for Improved EMI Signature
  • +500 mA/−800 mA Peak Current Drive Capability
  • Available in Three Frequency Options: 65 kHz, 100 kHz, and 133 kHz
  • Direct Optocoupler Connection
  • SPICE Models Available for TRANsient and AC Analysis
  • Pb-Free Packages are Available
Applications
  • High Power AC/DC Adapters for Notebooks, etc.
  • Offline Battery Chargers
  • Flat TVs, DVD RW, Home Theatre, Set Top Boxes
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
NCP1230D100R2G Active, Not Rec
Pb-free
Halide free
NCP1230 SOIC-8 751-07 1 260 Tape and Reel 2500 $0.4267
NCP1230D133R2G Active, Not Rec
Pb-free
Halide free
NCP1230 SOIC-8 751-07 1 260 Tape and Reel 2500 $0.4743
NCP1230D165R2G Active, Not Rec
Pb-free
Halide free
NCP1230 SOIC-7 751U 1 260 Tape and Reel 2500 $0.4267
NCP1230D65R2G Active, Not Rec
Pb-free
Halide free
NCP1230 SOIC-8 751-07 1 260 Tape and Reel 2500 $0.4267
NCP1230P100G Last Shipments
Pb-free
Halide free
NCP1230 PDIP-8 626B NA Tube 50  
NCP1230P133G Last Shipments
Pb-free
Halide free
NCP1230 PDIP-8 626B NA Tube 50  
NCP1230P65G Active, Not Rec
Pb-free
Halide free
NCP1230 PDIP-8 626B NA Tube 50 $0.5333
Market Leadtime (weeks) : 8 to 12
PandS   (2020-09-14 00:00) : >1K
Market Leadtime (weeks) : 2 to 4
PandS   (2020-09-14 00:00) : <1K
ON Semiconductor   (2020-09-02 00:00) : 2,500
Market Leadtime (weeks) : 4 to 8
Market Leadtime (weeks) : 4 to 8
PandS   (2020-09-14 00:00) : >1K
Market Leadtime (weeks) : Contact Factory
PandS   (2020-09-14 00:00) : >1K
Market Leadtime (weeks) : Contact Factory
PandS   (2020-09-14 00:00) : <1K
Market Leadtime (weeks) : 2 to 4
ON Semiconductor   (2020-09-02 00:00) : 41,150
Avnet   (2020-08-19 00:00) : <1K
Case Outlines
751-07    626B    751U   
Packages
NCP1230: PWM Controller, Fixed Frequency, Current Mode
NCP1230: PWM Controller, Fixed Frequency, Current Mode
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.