feedback
Rate this webpage
Need
Support?

RSL10: Radio SoC, Bluetooth® 5 Certified, SDK 3.4

Datasheet: Bluetooth 5 Radio System-on-Chip (SoC)
Rev. 4 (169kB)
»View Material Composition
» Product Change Notification
Customer Communication - "SweynTooth" BLE Cybersecurity Vulnerabilities

RSL10 is a Bluetooth 5, multi-protocol radio System on Chip (SoC) bringing ultra-low-power Bluetooth Low Energy to wireless applications.

Offering the industry’s lowest power consumption, RSL10 enables advanced wireless features while optimizing system size and battery life. The highly-integrated radio SoC features a dual-core architecture and a 2.4 GHz transceiver, providing the flexibility to support Bluetooth Low Energy and 2.4 GHz custom protocols.

The RSL10 Software Development Kit (SDK) enables rapid development of ultra-low power Bluetooth Low Energy applications by leveraging convenient abstraction, drivers and sample applications from Blinky to complete BLE peripherals, and everything in between.


Key features:
  • Free Eclipse-based ON Semiconductor IDE plus support for Keil uVision® and IAR Embedded Work Bench®
  • Complete Bluetooth Low Energy protocol stack
  • Bluetooth Low Energy mesh networking with Android app
  • FOTA (Firmware Over The Air) with Android and iOS apps
  • FreeRTOS
Download
RSL10 Getting Started Guide
Download
RSL10 Documentation Package
Download
RSL10 Software Utility Apps
Download
ON Semiconductor IDE Installer
Download
RSL10 Bluetooth Mesh Package
Download
RSL10 LPDSP32 Software Package
Download
RSL10 Software Package
Download
RSL10 USB Dongle BLE Explorer
Features
 
  • Ultra-Low-Power:
    - Industry's lowest power consumption in Deep Sleep Mode (62.5 nW) and Rx in Receive Mode (7 mW)
    - Industry's best EEMBC® ULPMark™ scores (1090 ULPMark CP @ 3 V; 1260 @ 2.1 V)
  • Advanced Multi-Protocol Wireless Functionality:
    - Rx Sensitivity: - 94 dBM
    - Transmitting Power: -17 to +6 dBm
    - Supports Bluetooth Low Energy and 2.4 GHz proprietary/custom protocols
    - Supports Firmware Over The Air (FOTA)
  • Flexible Voltage Supply Range (1.1 and 3.3 V):
    Supports devices using 1.2 and 1.5 V batteries without a required external DC/DC converter
  • Ultra-Miniature:
    RSL10 is offered in a 5.50 mm2 WLCSP and a 6 x 6 mm QFN. For added miniaturization, the radio SoC is also available in a complete System-in-Package (SiP) solution.
  • Sophisticated Dual-Core Architecture:
    Features a programmable Arm Cortex-M3 processor for clocking speeds up to 48 MHz and the flexibility to support 2.4 GHz proprietary and custom protocol stacks. An embedded Digital Signal Processor (DSP) enables signal processing intensive applications, such as wireless audio codecs.
  • On-Chip and Software Wireless Support:
    Features a 2.4 GHz Radio Frequency Front-End (RFFE) and a Bluetooth 5 certified baseband controller which supports 2 Mbps data rates. A wide range of supported Bluetooth low energy protocols are provided in the RSL10 development tools kit.
  • Highly-Integrated System-on-Chip (SoC):
    The powerful dual-core architecture is complemented by high-efficiency power management units, oscillators, flash, and RAM memories, a DMA controller, and peripherals and interfaces.
  • Other Key Technical Features:
    - 384 kB of flash memory
    - IP protection feature to secure flash contents
    - Configurable analog and digital sensor interfaces (GPIOs, LSADs, I2C, SPI, PCM)
Applications   End Products
  • IoT Edge-Node Applications
  • Bluetooth Low Energy Technology
  • Wearables
  • Energy Harvesting
 
  • Fitness Trackers/Activity Monitors
  • Smart Watches
  • Hearing Aids/Hearables
  • Heart Rate Monitors
  • Blood Glucose Monitors (BGM)
  • Continuous Glucose Monitors (CGM)
  • Pulse Oximeters
  • Appliances (e.g., A/C, fans, etc.)
  • Smart Locks
  • Lighting Applications
  • Automotive Applications
Evaluation/Development Tool Information
Product Status Compliance Short Description Action
BDK-GEVK Active
Pb-free
Bluetooth® Low Energy IoT Development Kit
BLE-SWITCH001-GEVB Active
Pb-free
Energy Harvesting Bluetooth® Low Energy Switch
RSL10-002GEVB Active
Pb-free
Radio SoC evaluation board, version 1 (QFN based)
RSL10-COIN-GEVB Active
Pb-free
RSL10 Temperature Sensor Beacon
RSL10-SENSE-DB-GEVK Active
Pb-free
RSL10 Sensor Development Kit with Debugger
RSL10-SENSE-GEVK Active
Pb-free
RSL10 Sensor Development Kit
RSL10-USB001GEVK Active
Pb-free
RSL10 USB Dongle
SECO-NCV7685RGB-GEVB Active
Pb-free
RGB LIGHTING EVB
FutureElectronics (2020-08-19) : 3
Avnet (2020-08-19) : 6
FutureElectronics (2020-08-19) : 1
Avnet (2020-08-19) : 1
Avnet (2020-08-19) : 10
FutureElectronics (2020-08-19) : 10
Avnet (2020-08-19) : 4
Availability & Samples
Specifications
Application Diagram
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
NCH-RSL10-101Q48-ABG Active
Pb-free
Halide free
RSL10, 48 Pin QFN QFN-48 485BA 3 260 Tape and Reel 3000 $2.3999
NCH-RSL10-101WC51-ABG Active
Pb-free
Halide free
RSL10, 51 Bump WLCSP WLCSP-51 567MT 1 260 Tape and Reel 5000 $3.9999
Market Leadtime (weeks) : 8 to 12
Avnet   (2020-08-19 00:00) : >1K
ON Semiconductor   (2020-09-02 00:00) : 54,000
FutureElectronics   (2020-08-19 00:00) : <100
Market Leadtime (weeks) : 13 to 16
Avnet   (2020-08-19 00:00) : >1K
ON Semiconductor   (2020-09-02 00:00) : 115,000

Product
Description
Pricing ($/Unit)
Compliance
Status
Data Transmission Standard
Frequency Band (MHz)
Carrier Frequency (MHz)
Package Type
NCH-RSL10-101Q48-ABG  
 $2.3999 
Pb
H
 Active   
Bluetooth Low Energy
RF
2400-2480
2400-2480
QFN-48
NCH-RSL10-101WC51-ABG  
 $3.9999 
Pb
H
 Active   
Bluetooth Low Energy
RF
2400-2480
2400-2480
WLCSP-51
Case Outlines
485BA    567MT   
RSL10: Radio SoC, Bluetooth® 5 Certified, SDK 3.4
Previously Viewed Products
Clear List

Associated Products
Do you need a device with A ready-to-use System-in-Package, Bluetooth® 5 solution? RSL10 SIP

Featured Video
Connected Lighting Solutions With Arrow Electronics
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.