feedback
Rate this webpage
Need
Support?

NCV7383: FlexRay® Transceiver, Clamp 15

Datasheet: FlexRay® Transceiver, Clamp 15
Rev. 1 (199kB)
Product Overview
»View Material Composition
» Product Change Notification
NCV7383 is a single-channel FlexRay transceiver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocal controller and a host on the other side.
NCV7383 mode control functionality is optimized for noded without the need of extended power management provided by transceivers with permanent connection to the car battery as is on NCV7381. NCV7383 is primarily intended for nodes switched off by ignition.
It offers excellent Electomagnetic compatibility (EMC) and Electrostatic discharge (ESD) performance.
Features
 
  • Compliant with FlexRay Electrical Physical Layer Specification Rev 3.0.1
  • FlexRay Transmitter and Receiver in Normal-Power Modes for Communication up to 10 Mbit/s
  • Support of 60 ns Bit Time
  • FlexRay Low-Power Mode Receiver for Remote Wake-up Detection
  • Excellent EMS Level Over Full Frequency Range. Very Low EME.
  • Bus Pins Protected Against >10 kV System ESD Pulses
  • Safe Behavior Under Missing Supply or No Supply Conditions
  • Interface Pins for a Protocol Controller and a Host (TxD, RxD, TxEN, STBN, BGE, ERRN, CSN, SCK, SDO)
  • Supply Pins VCC, VIO with Independent Voltage Ramp Up:
    - VCC Supply Parametrical Range from 4.75 V to 5.25 V
    - VIO Supply Parametrical Range from 2.3 V to 5.25 V
  • TxEN Timeout and BGE Feedback
  • Two Error Indication Modes
    - Track mode Error Signaling on ERRN Pin
    - Latched mode Status Register accessible via SPI
  • Compatible with 14 V and 28 V Systems
  • Operating Ambient Temperature -40C to +125C (TAMB_Class1)
  • Junction Temperature Monitoring
  • FlexRay Functional Classes
    - Bus Driver Bus Guardian Interface
    - Bus Driver Logic Level Adaptation
    - Bus Driver Remote Wakeup
Technical Documentation & Design Resources
Software (1) Package Drawings (1)
Application Notes (1) Videos (1)
Data Sheets (1) Evaluation Board Documents (5)
Evaluation/Development Tool Information
Product Status Compliance Short Description Action
NCV73830V1GEVB Active
Pb-free
Single−Channel FlexRay™ Bus Driver Evaluation Board
Availability & Samples
Specifications
Application Diagram
Intaractive Block Diagram
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
NCV7383DB0R2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
NCV7383 TSSOP-14 948AE 2 260 Tape and Reel 2500 Contact Sales Office
Market Leadtime (weeks) : Contact Factory

Product
Description
Pricing ($/Unit)
Compliance
Status
Data Transmission Standard
Data Rate
Number of Drivers
Number of Receivers
VCC Min (V)
VCC Max (V)
tPLH Max (µs)
IO Max (µA)
IIH Max (mA)
Package Type
NCV7383DB0R2G  
 NCV7383 
Pb
A
H
P
 Active   
FlexRay
10 Mb/s
1
1
4.75
5.25
TSSOP-14
Case Outlines
948AE   
NCV7383: FlexRay<sup>®</sup> Transceiver, Clamp 15
Application
Diagram - Block
Automotive
Door Module - Transceiver or SBC
Internet of Things (IoT)
IoT Edge Sensor Node - Communication Interface
Automotive
Traction Inverter - Communication
Automotive
Body Control Module - Communications
Previously Viewed Products
Clear List

Associated Products
Do you need a device with Connectivity to Clamp 30 ECUs? NCV7381

Featured Video
Transceiver Solutions with the NCV73830V1GEVB Evaluation Board
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.