feedback
Rate this webpage
Need
Support?

TPS2399: Hot Swap Controller with Enable, -48 V

Datasheet: -48 V Hot Swap Controller for Redundant Supply Systems
Rev. 0 (357kB)
Product Overview
»View Material Composition
» Product Change Notification
The TPS2398 and TPS2399 integrated circuits are hot swap power managers optimized for use in nominal −48 V systems. They incorporate an improved circuit breaker response that provides rapid protection from short circuits, while still enabling plug−ins to tolerate large transients that can be generated by the sudden switchover to a higher voltage supply. They are designed for supply voltage ranges up to −80 V, and are rated to withstand spikes to −100 V. In conjunction with an external N−channel FET and sense resistor, they can be used to enable live insertion of plug−in cards and modules in powered systems. Both devices provide load current slew rate and peak magnitude limiting, easily programmed by sense resistor value and a single external capacitor. They also provide single-line fault reporting, electrical isolation of faulty cards, and protection against nuisance overcurrent trips. The TPS2398 latches off in response to current faults, while the TPS2399 periodically retries the load in the event of a fault.
Features   Benefits
     
  • Wide Input Supply: −36 V to −80 V
 
  • Wide input voltage range
  • Transient Rating to −100 V
 
  • Withstand input voltage spikes to −100 V
  • Improved Transient Response
 
  • Input current spike suppression during input voltage transient
  • Εnable Input (EN)
 
  • Output voltage could be switched on/off
  • Programmable Current Limit
 
  • Current limit could be set by external resistor
  • Programmable Current Slew Rate
 
  • Current slew rate could be set by external capacitor
  • Fault Timer to Eliminate Nuisance Trips
 
  • Load current spikes shorter than about 4us are ignored
  • Open−Drain Power Good Output (/PG)
 
  • /PG signal could be used to monitor hot-swap status
Applications   End Products
  • −48 V Distributed Power Systems
  • Redundant Negative Voltage Supplies
  • Central Office Switching Systems
 
  • Power source for telecom / computing (rack) systems
Technical Documentation & Design Resources
Data Sheets (1) Package Drawings (1)
Availability & Samples
Specifications
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
TPS2398DMT7G Active
Pb-free
Halide free
TPS2399, Simple -48V Hot Swap Controller with Enable MSOP-8 846AD 1 260 Tape and Reel 3000 $1.0666
TPS2399DMT7G Active
Pb-free
Halide free
TPS2399, Simple -48V Hot Swap Controller with Enable MSOP-8 846AD 1 260 Tape and Reel 3000 $1.0666
Market Leadtime (weeks) : 4 to 8
ON Semiconductor   (2020-09-02) : 15,000
Market Leadtime (weeks) : 4 to 8
ON Semiconductor   (2020-09-02) : 6,000

Product
Description
Pricing ($/Unit)
Compliance
Status
Type
VI Max (V)
rDS(on) Max (mΩ)
TSD Typ (°C)
Thyst Typ (°C)
Package Type
TPS2398DMT7G  
 $1.0666 
Pb
H
 Active   
Latch
-100
NA
NA
NA
MSOP-8
TPS2399DMT7G  
 $1.0666 
Pb
H
 Active   
Auto-Retry
-100
NA
NA
NA
MSOP-8
Case Outlines
846AD   
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.