RSS Notification

NCL30001  :  Single Stage Power Factor Correction and Step-Down Controller for LED Lighting

• Single stage continuous conduction (CCM) flyback yields reduced part count and lower overall cost
• Ideal LED driver solution for 40-150 W area lighting applications like street lights, wall packs and architectural lighting
• Frequency jittering for reducing EMI signature and robust brownout and overtemperature fault detection

NCS5650  :  2.0 Amp PLC Line Driver

• High efficiency Class AB low distortion power line driver with an optimized interface for power line carrier modems including AMIS49587
• Capability to drive 2.0 A peak into reactive loads
• Current shutdown minimizes power consumption during power down states

NCP3125  NCP3126  NCP3127  :  High Efficiency Synchronous DC-DC Switching Regulators

• Produce output voltages adjustable down to 0.8 V from +5.0 to +12 V input
• SOIC-8 with low Rdson high-side and low-side MOSFETs
• Three pin-compatible versions: NCP3125 (4.0 A), NCP3126 (3.0 A), NCP3127 (2.0 A)

NTST30100SG  :  30 Amp, 100 Volt Low VF Schottky Diode

• Trench-based Schottky technology yields very low forward voltage, maintaining low leakage
• Fast switching with exceptional temperature stability
• High efficiency for regulatory compliance in notebook/netbook adapters, ATX power supplies and flat panel displays

NCL30001  :  Single Stage Power Factor Correction and Step-Down Controller for LED Lighting

• Single stage continuous conduction (CCM) flyback yields reduced part count and lower overall cost
• Ideal LED driver solution for 40-150 W area lighting applications like street lights, wall packs and architectural lighting
• Frequency jittering for reducing EMI signature and robust brownout and overtemperature fault detection

NDD03N50Z  NDD04N50Z  NDF11N50Z  NDF08N60Z  :  500 & 600 V N-Channel MOSFETs

• 3, 4, and 11 A versions at 500 V; 8 A version at 600 V
• RDS(on) as low as 0.48 Ω; Qg as low as 10 nC; high ESD capability with zener protection diode
• Available in DPAK, IPAK, and TO-220FP

NCV7321  :  Stand Alone LIN Transceiver

• Integrated system level ESD performance up to 13 kV
• Sleep mode current consumption < 10 μA
• Compliant to both J2602 and LIN2.1 standards; TS16949 qualified

NCN8024  :  NDS-Compliant 3.0 and 5.0 V Smart Card Interface IC

• Fully compliant with ISO 7816-3 and EMV standards and standards specifying conditional access in set top boxes, including NDS
• 3 protected bidirectional buffered I/O lines; independent power supply on the controller interface
• Automatic device deactivation in case of overheating, card takeoff or power supply dropout

NCT1008  :  ±1°C Dual-Channel Digital Temperature Sensor

• On-chip and remote temperature sensor for elevated thermal density applications; 2.0 x 2.0 mm WDFN-8
• Automatically cancels up to 1.5 kΩ (typical) of resistance in series with remote diode to allow noise filtering
• 2-wire SMBus serial interface with SMBus alert support