onsemi Launches Highly Efficient USB Power Delivery Solutions



更高频率的 AC-DC 控制器和驱动器改善产业设计,同时确保整个负载范围内最佳能效

2022年5月13日—领先于智能电源和智能感知技术的安森美(onsemi,美国纳斯达克股票代号:ON),推出用于 USB 供电 (PD) 设计的三件一套新产品。新的控制器和驱动器提供创新的功能,能显著减少高能效 AC-DC 电源的物料单(BOM)含量,尤其是在100 W 以上的负载范围。

安森美电源转换方案分部高级总监 Shane Chilton 说:“USB PD 是个重要且不断增长的应用,但要满足其能效和尺寸要求对设计人员是严峻的挑战。设计人员采用我们这套新产品,可以从现有 BOM 中删除多达 15 个器件,降低设计成本,同时确保满足USB PD应用的严苛能效和性能标准。”

NCP1345 是一款准谐振 (QR) 反激式控制器,应用于高性能离线电源和 USB Type-C PD 快速充电。 高频 QR 工作(高达 350 kHz)能减小磁性器件的尺寸。 由于内置恒定输出电流限制,NCP1345兼容受限制电源 (LPS) 的要求,而快速频率返走功能确保出色的轻载能效。

安森美另一款新品NCP1623 是小尺寸的升压功率因数校正 (PFC) 控制器,额定功率达 300 W,应用于 USB PD 快充适配器和计算机电源。该器件在重载时以临界导电模式 (CrM) 工作,然后随着负载的减少进入非连续导电模式 (DCM),以在额定负载和轻载时都能实现能效最大化。 NCP1623 在低输入电压可将能效提高到 2%,睡眠模式用电 <100 μA,优化空载输入电源状态。

NCP4307是一个高性能驱动器,可在多种高性能开关电源拓扑中与同步整流 (SR) MOSFET 一起使用。 该器件将从内部一个 200 V CS 引脚自供电,实现上桥配置和低 VOUT,而不需要一个辅助电源。 双 VCC 引脚选择最佳 VCC 源端以尽量降低损耗,从而优化宽范围 VOUT 应用的设计。

About onsemi

onsemi (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. onsemi offers a highly differentiated and innovative product portfolio, delivering intelligent power and sensing technologies that solve the world’s most complex challenges and leads the way to creating a safer, cleaner, and smarter world. onsemi is recognized as a Fortune 500® company and included in the S&P 500® index. Learn more about onsemi at www.onsemi.com.


onsemi and the onsemi logo are trademarks of Semiconductor Components Industries, LLC. All other brand and product names appearing in this document are registered trademarks or trademarks of their respective holders. Although the Company references its website in this news release, information on the website is not to be incorporated herein.

If you are a member of the press and are interested in receiving onsemi press releases via email, please complete the form below.

* Full Name

* Email

* Media you represent

* Press Category

*Required fields

Choose your prefered language. You can choose more than one.