Interfacing PN532 NFC with RSL10


I wanted to know whether there is any way to interface the PN532 NFC module with RSL10.


PN532 NFC module has I2C or SPI interface so it would be possible.

Based on the information on the module (V_cc= 5V) you need use voltage level translator. Our RSL10 EVB can’t support that.

RSL10 has CMSIS examples for I2C_cmsis_ driver as well as SPI_cmsis_driver.

In CMSIS configuration wizard you can configure I2C or SPI interface.


Thank you for using our community forum!