feedback
Rate this webpage
Need
Support?

FUSB302TGEVB: Programmable USB Type-C Controller with PD

The FUSB302TGEVB evaluation board targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability.The FUSB302TGEVB enables the USB Type-C detection including attach, and orientation. The FUSB302 integrates the physical layer of the USB BMC power delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.Reference code is available for the FUSB302 for easy implementation of Type-C and USB BMC power delivery protocol across several embedded controller platforms. Click on the Reference Code request link to the right.
Features and Applications

Features

  • Full Type-C 1.1 Support. Integrates the following functionality of the CC pin
  • Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.
  • Software configurable either as a dedicated host, dedicated device, or dual role
  • Dual-Role Functionality with Autonomous DRP Toggle
  • Ability to connect as either a host or a device based on what has been attached.
  • Attach/Detach Detection as Host
Evaluation/Development Tool Information
Product Status Compliance Short Description Parts Used Action
FUSB302TGEVB Active
Pb-free
Programmable USB Type-C Controller with PD FUSB302TMPX
Technical Documents
Type Document Title Document ID/Size Rev
Eval Board: BOM FUSB302TGEVB Bill of Materials (ROHS Compliant) FUSB302TGEVB_BOM_ROHS - 285 KB  3 
Eval Board: Gerber FUSB302TGEVB Gerber Layout Files (Zip format) FUSB302TGEVB_GERBER - 191 KB  0 
Design & Development Tools FUSB302TGEVB Programming procedure FUSB302TGEVB_PROGRAMMING - 468 KB  0 
Eval Board: Schematic FUSB302TGEVB Schematic FUSB302TGEVB_SCHEMATIC - 282 KB  0 
Eval Board: Test Procedure FUSB302TGEVB_TEST_PROCEDURE FUSB302TGEVB_TEST_PROCEDURE.pdf - 223 KB  1 
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.