feedback
Rate this webpage
Need
Support?

FUSB252GEVB: Eval board for FSUSB252

The FUSB252 evaluation board is designed to be inserted between a board that contains a Type-C controller (such as FUSB301 or FUSB302) and a source of voltage for OVP testing. Test points on the CC pins will allow OVP test scenarios to test the devices intended function. An LED indicator will show an OVP condition and the device should break connection to the USB host. If there isn’t access to a Type-C voltage source, test points (GND and VDD) are available on the board for direct power supply connections.

After performing OVP testing, the Type-C receptacle can accept a Type-C device such as a memory stick to demonstrate normal USB functionality (with SEL=L).
Evaluation/Development Tool Information
Product Status Compliance Short Description Parts Used Action
FUSB252GEVB Active
Pb-free
Eval board for FSUSB252 FUSB252UMX
Technical Documents
Type Document Title Document ID/Size Rev
Eval Board: BOM FUSB252GEVB Bill Of Materials (ROHS Compliant) FUSB252GEVB_BOM_ROHS - 110 KB  0 
Eval Board: Gerber FUSB252GEVB Gerber Files (ZIP Format) FUSB252GEVB_Gerbers - 374 KB  0 
Eval Board: Schematic FUSB252GEVB Schematic FUSB252GEVB_SCHEMATIC - 117 KB  0 
Eval Board: Test Procedure FUSB252GEVB Test Procedure FUSB252GEVB_TEST_PROCEDURE - 12 KB  0 
Eval Board: Manual FUSB252GEVB_USERS_GUIDE_V1-1.REV0.PDF FUSB252GEVB_USERS_GUIDE_V1-1.rev0 - 852 KB  0 
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.