feedback
Rate this webpage
Need
Support?

Selected In-Vehicle Networking Solution
Selected Solution
Return to In-Vehicle Networking solution

FlexRay In-Vehicle Networking (IVN)

ON Semiconductor’s FlexRay transceivers are fully compliant to the FlexRay Physical Layer Specification V3.0.1. The transceiver is a Bus Driver (BD), and it accomplishes the physical interface between the Communication Controller and the Bus medium. Designed for critical powertrain and safety information, it realizes bus communication without data collision.
Products
NCV7381C: FlexRay® Transceiver, Clamp 30
NCV7381C is a high−temperature single-channel FlexRay transceiver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s
NCV7381C: FlexRay® Transceiver, Clamp 30
Technical Documents
Basics of IVN Protocols
This presentation deals with basics of LIN, CAN (FD), FlexRay and automotive Ethernet technologies.
Basics of IVN Protocols
NCV7381 FlexRay Bus Driver Application Note
NCV7381 is a single-channel FlexRay bus driver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s.
NCV7381 FlexRay Bus Driver Application Note
NCV7383 FlexRay® Bus Driver Application Note
NCV7383 is a single-channel FlexRay bus driver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s.
NCV7383 FlexRay® Bus Driver Application Note
Evaluation Boards
NCV73810V2GEVB: FlexRay Transceiver, Clamp 30 Evaluation Board
The NCV7381 Evaluation Kit is a Reference Design for FlexRay™ transceiver designed consisting from a two stand-alone 2 channel FlexRay™ nodes. The boards are intended to give designers easy, quick and convenient means for evaluation of NCV7381 FlexRay bus drivers.
NCV73810V2GEVB: FlexRay Transceiver, Clamp 30 Evaluation Board
NCV7381GEVK: FlexRay Transceiver, Clamp 30 Evaluation Kit
The NCV7381GEVK is designed to quickly evaluate the NCV7381, a single channel FlexRay bus driver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1 and capable of communicating at speeds of up to 10 Mbit/s.
NCV7381GEVK: FlexRay Transceiver, Clamp 30 Evaluation Kit
NCV73830V1GEVB:  Single−Channel FlexRay Bus Driver Evaluation Board
NCV73830V1GEVB evaluation board is a single-channel FlexRay bus driver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s.
NCV73830V1GEVB:  Single−Channel FlexRay Bus Driver Evaluation Board
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.