feedback
Rate this webpage
Need
Support?

NLSX5014: Level Translator, 4-Bit, 100 Mbps, Configurable Dual-Supply

Datasheet: 4-Bit 100 Mb/s Configurable Dual-Supply Level Translator
Rev. 8 (166kB)
Product Overview
»View Reliability Data
»View Material Composition
» Product Change Notification
The NLSX5014 is a 4-bit configurable dual-supply autosensing bidirectional level translator that does not require a direction control pin. The IO Vcc- and IO VL-ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and the VL supply rails are configurabel from 0.9 V to 4.5 V. This allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltage on the VCC side, and vice-versa. The NLSX5014 offers the feature that the values of the VCC and VL supplies are indenpendent. Design flexibility is maximized because VL can be set to a value either greater than or less than the VCC supply. In contrast, the majority of competitive auto sense translators have a restriction that the value of the VL supply must be equal to less than (VCC-0.4) V. The NLSX5014 has high output current capability, which allows the translator to drive high capacitive loads such as most high frequency EMI filters. Another feature of the NLSX5014 is that each IO_VLn and IO_VCCn channel can function as either an input or an output. An Output Enable (EN) input is avaialbe to reduce the power consumption. The EN pin can be used to disable both I/O ports by putting them in 3-state which significantly reduces the supply.
Features
 
  • Wide VCC, VL operating range: 0.9 V to 4.5 V
  • VL and VCC are independent. VL may be greater than, equal to, or less than VCC
  • High 100 pF capacitive drive capability
  • High speed with 140 Mb/s guaranteed date rate for VCC, VL > 1.8 V
  • Low bit to bit skew
  • Overvoltage tolerant Enable and I/O pins
  • Nonpreferential Power up sequencing
  • Power Off protection
  • Small packaging: 1.7 mm x 2.0 mm UQFN-12, SOIC-14, TSSOP-14
  • These are PbFree devices
Applications
  • Mobile Phones, PDAs, Other Portable Devices
Evaluation/Development Tool Information
Product Status Compliance Short Description Action
BLE-IOT-GEVB Active
Pb-free
IoT IDK BLE RSL10 Evaluation Board
FutureElectronics (2020-08-19) : 3
Availability & Samples
Specifications
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
NLSX5014DR2G Active
Pb-free
Halide free
NLSX5014 SOIC-14 751A-03 1 260 Tape and Reel 2500 $0.476
NLSX5014DTR2G Active
Pb-free
Halide free
NLSX5014 TSSOP-14 948G-01 1 260 Tape and Reel 2500 $0.476
NLSX5014MUTAG Active
Pb-free
Halide free
NLSX5014 UQFN-12 523AE 1 260 Tape and Reel 3000 $0.42
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Avnet   (2020-08-19 00:00) : >1K
Market Leadtime (weeks) : Contact Factory
PandS   (2020-09-14 00:00) : >1K
Avnet   (2020-08-19 00:00) : >10K

Product
Description
Pricing ($/Unit)
Compliance
Status
Channels
Input Level
VCC Min (V)
VCC Max (V)
tpd Max (ns)
IO Max (mA)
Package Type
NLSX5014DR2G  
 $0.476 
Pb
H
 Active   
4
CMOS
0.9
4.5
11
0.02
SOIC-14
NLSX5014DTR2G  
 $0.476 
Pb
H
 Active   
4
CMOS
0.9
4.5
11
0.02
TSSOP-14
NLSX5014MUTAG  
 $0.42 
Pb
H
 Active   
4
CMOS
0.9
4.5
11
0.02
UQFN-12
Case Outlines
523AE    948G-01    751A-03   
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.