NB7NPQ7022M: 3.3 V USB 3.1 Dual Channel High Gain Linear Redriver

Datasheet: 3.3 V USB 3.1 Dual Channel High Gain Linear Redriver
Rev. 0 (129kB)
Product Overview
View Material Composition
Product Change Notification
The NB7NPQ7022M is a 3.3 V dual channel, high gain, redriver for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter−symbol interference (ISI). The NB7NPQ7022M compensates for these losses by engaging varying levels of equalization at the input receiver, and flat gain amplification on the output transmitter. The Flat Gain and Equalization are controlled by four level control pins. Each channel has a set of independent control pins to make signal optimization possible. After power up, the NB7NPQ7022M periodically checks both of the TX output pairs for a receiver connection. When the receiver is detected on both channels the RX termination becomes enabled and the NB7NPQ7022M is set to perform the redriver function. The NB7NPQ7022M comes in a small 3 x 3 mm UQFN16 package and is specified to operate across the entire industrial temperature range of –40°C to 85°C.
Features
 
  • 3.3 V ± 5% Power Supply
  • Low Power Consumption: 114mA in Active mode
  • Supports USB 3.1 Gen 1 and USB 3.1 Gen 2 Data Rates
  • Automatic Receiver Termination Detection
  • Integrated Input and Output Termination
  • Independent, Selectable Equalization and Flat Gain
  • Hot−Plug Capable
  • Small 3 x 3 x 0.5 mm UQFN16 Package, Flow Through Design that ease PCB layout
  • Operating Temperature Range: –40°C to 85°C
Applications   End Products
  • USB3.1 Type−C and Type−A Signal Routing
  • Mobile Phone and Tablet
  • Computer and Laptop
  • Docking Station and Dongle
  • Active Cable, Back Planes
  • Gaming Console, Smart T.V.
 
  • Mobile Phone and Tablet
  • Computer and Laptop
  • Docking Station and Dongle
  • Active Cable, Back Planes
  • Gaming Console, Smart T.V.
Technical Documentation & Design Resources
Application Notes (2) Package Drawings (1)
Data Sheets (1)  
Evaluation/Development Tool Information
Product Status Compliance Short Description Action
NB7NPQ7022MAMUGEVB Consult Sales Office
Pb-free
Demo Board for Dual Channel USB 3.1 Re-driver with Type A Connectors
NB7NPQ7022MCMUGEVB Consult Sales Office
Pb-free
Demo Board for Dual Channel USB 3.1 Re-driver with Type C Connectors
Availability & Samples
Specifications
Interactive Block Diagram
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
NB7NPQ7022MMUTXG Active
Pb-free
Halide free
NB7NPQ7022M UQFN-16 523AF 1 260 Tape and Reel 3000 $0.75
Market Leadtime (weeks) : Contact Factory

Product
Description
Pricing ($/Unit)
Compliance
Status
Supply Voltage (V)
Protocol
Channel Count
Data Rate (Gbps)
Lane/Ports
Programming Interfaces
Package Type
NB7NPQ7022MMUTXG  
 $0.75 
Pb
H
 Active   
3.3
USB
2
10
1
Pinstrap
UQFN-16
Case Outlines
523AF   
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.