Gate Drivers | FL3100T

Low-Side Gate Driver with LED PWM Dimming Control for Smart LED Lighting

Active

Datasheet

Products

Similar Products

Overview

The FL3100T 2 A gate driver is designed to drive an N-channel enhancement-mode MOSFET in low-side switching applications by providing high peak current pulses during the short switching intervals. The FL3100T has two inputs that can be configured to operate in non-inverting (IN) mode with a DIM pin for PWM dimming control of the LED Driver. High accuracy PWM dimming control required in smart LED drivers is possible by adjusting the duty ratio of the DIM input. If one or both inputs are left unconnected, internal resistors bias the inputs such that the output is pulled LOW to hold the power MOSFET off.
The driver is available with fixed TTL input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output LOW until the supply voltage is within operating range. The FL3100T delivers fast MOSFET switching performance, which helps maximize efficiency in high-frequency LED driver designs.
The FL3100T is available in a 5-pin, SOT23 or a 2 x 2 mm, 6-lead, Molded Leadless Package (MLP) for the smallest size with excellent thermal performance.

  • Lighting

  • Non-inverting Input Logic with DIM Control Input for PWM Dimming Down to 0.1% for Hybrid Dimming
  • 4.5 to 18 V Operating Range
  • TTL Inputs Independent of Supply Voltage
  • 2.5 A Sink / 1.8 A Source at VOUT = 6 V
  • Internal Resistors Turn Driver Off If No Inputs
  • 13 ns Typical Rise Time and 9 ns Typical Fall-Time with 1 nF Load
  • MillerDrive™ Technology
  • Typical Propagation Delay Time Under 20 ns with Input Falling or Rising
  • 6-Lead, 2 x 2 mm MLP or 5-Pin, SOT23 Packages
  • Rated from -40°C to 125°C Ambient

Tools and Resources

Product services, tools and other useful resources related to FL3100T

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your onsemi account.

Search

Close Search

Products:

2

Share

Sort by

Product Groups:

┗

Orderable Parts:

2

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Power Switch

Number of Outputs

Topology

Isolation Type

Vin Max (V)

VCC Max (V)

Rise Time (ns)

Fall Time (ns)

Drive Source Current Typ (A)

Drive Sink Current Typ (A)

Turn On Prop. Delay Typ (ns)

Turn Off Prop. Delay Typ (ns)

Delay Matching

Reference Price

FL3100TMPX

Loading...

Active

CAD Model

Pb

A

H

P

WDFN-6

511CY

1

260

REEL

3000

Y

MOSFET

1

Single

Non-Isolated

-

18

13

9

-

-

-

-

-

$0.3321

More Details

FL3100TSX

Loading...

Lifetime

Similar Products
CAD Model

Pb

A

H

P

SOT-23-5

527AH

1

260

REEL

3000

N

MOSFET

1

Single

Non-Isolated

-

18

13

9

-

-

-

-

-

$0.4787

More Details

Show More

1-25 of 25

Products per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with onsemi sales team.

Reliability Data

Die Related Summary Data

Device: FL3100TMPX

Equivalent to wafer fab process: CMOS SUB

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

CMOS SUB

2

920154574

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search