Multi-Mode Buck Converter with LDO Assist for GSM / EDGE, 3 G/3.5 G and 4 G PAs

Favorite

Overview

The FAN5909 is a high-efficiency, low-noise, synchronous, step-down, DC-DC converter optimized for powering Radio Frequency (RF) Power Amplifiers (PAs) in handsets and other mobile applications. Load currents up to 2.5 A are allowed, which enables GSM / EDGE, 3 G/3.5 G, and 4G platforms under very poor VSWR conditions.
The output voltage may be dynamically adjusted from 0.40 V to 3.60 V, proportional to an analog input voltage VCON ranging from 0.16 V to 1.44 V, optimizing power added efficiency. Fast transition times of less than 6 µs are achieved, allowing excellent inter-slot settling.
An integrated LDO is automatically enabled under heavy load conditions or when the battery voltage and voltage drop across the DC-DC PMOS device are within a set range of the desired output voltage. This LDO assist feature supports heavy load currents under the most stringent battery and VSWR conditions while maintaining high efficiency, low dropout, and superior spectral performance.
The FAN5909 DC-DC operates in PWM Mode with a 2.9 MHz switching frequency and supports a single, smallform-factor inductor ranging from 1.0 µH to 2.2 µH. In addition, PFM operation is allowed at low load currents for output voltages below 1.5 V to maximize efficiency. PFM operation can be disabled by setting MODE pin to LOW.
When output regulation is not required, the FAN5909 may be placed in Sleep Mode by setting VCON below 100 mV nominally. This ensures a very low IQ (<50 μA) while enabling a fast return to output regulation.
FAN5909 is available in a low profile, small form factor, 16 bump, Wafer-Level Chip-Scale Package (WLCSP) that is 1.61 mm x 1.61 mm. Only three external components are required: two 0402 capacitors and one 2016 inductor.

  • Solution Size < 9.52 mm2
  • 2.7 V to 5.5 V Input Voltage Range
  • VOUT Range from 0.40 V to 3.60 V (or VIN)
  • Single, Small Form-Factor Inductor
  • 29 mΏ Integrated LDO
  • 100% Duty Cycle for Low-Dropout Operation
  • Input Under-Voltage Lockout / Thermal Shutdown
  • 1.61 mm x 1.61 mm, 16-Bump, 0.4 mm Pitch WLCSP
  • 2.9 MHz PWM Mode
  • 6 μs Output Voltage Step Response for early Tx
  • Power-Loop Settling with 14 μF Load Capacitance
  • Sleep Mode for ~50 μA Standby Current
  • Consumption
  • Forced PWM Mode
  • 2.9 MHz PWM-Only Mode
  • Up to 95% Efficient Synchronous Operation in High Power Conditions
  • 2.9 MHz PWM Operation at High Power and PFM Operation at Low Power and Low Output Voltage for Maximum Low Current Efficiency
  • Auto PFM/PWM Mode

Product List

If you wish to buy products or product samples, please log in to your onsemi account.

Search

Close Search

Products:

1

Share

Product Groups:

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Topology

Control Mode

VCC Min (V)

VCC Max (V)

VO Typ (V)

IO Typ (A)

Efficiency (%)

fSW Typ (kHz)

Reference Price

FAN5909UCX

Loading...

Obsolete

CAD Model

Pb

A

H

P

WLCSP-16

1

260

REEL

3000

N

Step-Down

Voltage Mode

2.7

5.5

Adjustable

3

95

2900

Price N/A

More Details

Show More

1-25 of 25

Products per page

Jump to :