Converters | FAN5354

3Mhz, 3A Synchronous Buck Regulator

Obsolete

Datasheet

Products

Similar Products

Overview

The FAN5354 is a step-down switching voltage regulator that delivers an adjustable output from an input voltage supply of 2.7V to 5.5V. Using a proprietary architecture with synchronous rectification, the FAN5354 is capable of delivering 3A at over 85% efficiency, while maintaining a very high efficiency of over 80% at load currents as low as 2mA. The regulator operates at a nominal fixed frequency of 3MHz, which reduces the value of the external components to 470nH for the output inductor and 10µF for the output capacitor. Additional output capacitance can be added to improve regulation during load transients without affecting stability and inductance up to 1.2µH may be used with additional output capacitance.
At moderate and light loads, pulse frequency modulation (PFM) is used to operate the device in power-save mode with a typical quiescent current of 270µA. Even with such a low quiescent current, the part exhibits excellent transient response during large load swings. At higher loads, the system automatically switches to fixed-frequency control, operating at 3MHz. In shutdown mode, the supply current drops below 1µA, reducing power consumption. PFM mode can be disabled if constant frequency is desired. To avoid audible noise, the regulator limits its minimum PFM frequency. The FAN5354 is available in 12-lead 3x3.5mm MLP package.

  • TBA

  • 3MHz Fixed-Frequency Operation
  • Best-in-Class Load Transient
  • 3A Output Current Capability
  • 2.7V to 5.5V Input Voltage Range
  • Adjustable Output Voltage: 0.8 to 2.0 V
  • PFM Mode for High Efficiency in Light Load (Forced PWM Available on MODE Pin)
  • Minimum PFM Frequency Avoids Audible Noise
  • 270µA Typical Quiescent Current in PFM Mode
  • External Frequency Synchronization
  • Low Ripple Light-Load PFM Mode with Forced PWM Control
  • Power Good Output
  • Internal Soft-Start
  • Input Under-Voltage Lockout (UVLO)
  • Thermal Shutdown and Overload Protection
  • 12-Lead 3x3.5mm MLP

Tools and Resources

Product services, tools and other useful resources related to FAN5354

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your onsemi account.

Search

Close Search

Products:

1

Share

Sort by

Product Groups:

┗

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Topology

Control Mode

VCC Min (V)

VCC Max (V)

VO Typ (V)

IO Typ (A)

Efficiency (%)

fSW Typ (kHz)

Reference Price

FAN5354MPX

Loading...

Obsolete

Similar Products
CAD Model

Pb

A

H

P

WDFN-12

511DK

1

260

REEL

3000

N

Step-Down

Voltage Mode

2.7

5.5

Adjustable

3

85

3000

Price N/A

More Details

Show More

1-25 of 25

Products per page

Jump to :

1

Support on the go

Find and compare products, get support and connect with onsemi sales team.

Reliability Data

Die Related Summary Data

Device: FAN5354MPX

Equivalent to wafer fab process: 36

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

36

0

630555494

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search