Controllers | NCP81243

Multi-Phase Buck Controller for IMVP8

Active

Datasheet

Products

Similar Products

Overview

The NCP81243 is a Multi-Phase buck solution is optimized for Intel IMVP8 compatible CPUs with user configurations of 3/2/1+ 2/1 phases, including an option to do 4+1. The controller combines true differential voltage sensing, differential inductor DCR current sensing, input voltage feed-forward, and adaptive voltage positioning to provide accurate regulated power for Desktop applications. The control system is based on Dual-Edge pulse-width modulation (PWM) combined with DCR current sensing providing the fastest initial response to dynamic load events at reduced system cost.

  • Industrial Servers
  • Embedded Systems Power Management

  • Meets Intel's IMVP8 Specification
  • Current Mode Dual Edge Modulation for Fast Initial Response to Transient Loading
  • Dual High Performance Operational Error Amplifier
  • One Digital Soft Start Ramp for Both Rails
  • Dynamic Reference Injection® (Patent #US07057381)
  • Accurate Total Summing Current Amplifier(Patent #US006683441)
  • DAC with Droop Feed-forward Injection(Patent Pending)
  • Dual High Impedance Differential Voltage and Total Current Sense Amplifiers
  • Phase-to-Phase Dynamic Current Balancing
  • “Lossless” DCR Current Sensing for Current Balancing
  • Summed Compensated Inductor Current Sensing for Droop
  • True Differential Current Balancing Sense Amplifiers for Each Phase
  • Adaptive Voltage Positioning (AVP)
  • Switching Frequency Range of 200KHz – 1.5MHz
  • Startup into Pre-Charged Loads while avoiding False OVP
  • Vin Feed Forward Ramp Slope
  • Over Voltage Protection (OVP) & Under Voltage Protection (UVP)
  • Over Current Protection (OCP)
  • Dual Power Good Output with Internal Delays

Tools and Resources

Product services, tools and other useful resources related to NCP81243

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your onsemi account.

Search

Close Search

Products:

1

Share

Sort by

Product Groups:

┗

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Topology

Phases

Control Mode

VCC Min (V)

VCC Max (V)

fSW Typ (kHz)

Reference Price

NCP81243MNTXG

Loading...

Active

CAD Model

Pb

A

H

P

QFN-52

485BE

1

260

REEL

2500

Y

Step-Down

1/2/3

Voltage Mode

4.75

5.25

300 - 1200

$1.3665

More Details

Show More

1-25 of 25

Products per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with onsemi sales team.

Reliability Data

Die Related Summary Data

Device: NCP81243MNTXG

Equivalent to wafer fab process: ONC25

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

ONC25

1

2712519294

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search