feedback
Rate this webpage
Need
Support?

NCP1851: Switching Battery Charger, 1.6 A, with Power Path Management

Datasheet: Fully Integrated Li-Ion Switching Battery Charger with Power Path Management and USB On-The-Go Support
Rev. 6 (550.0kB)
Product Overview
»View Reliability Data
»View Material Composition
» Product Change Notification
The NCP1851 is a fully programmable single cell Lithium-ion switching battery charger optimized for charging from a USB compliant input supply and AC adaptor power source. The device integrates a synchronous PWM controller, power MOSFETs, and the entire charge cycle monitoring including safety features under software supervision. An optional battery FET can be placed between the system and the battery in order to isolate and supply the system. The NCP1851 junction temperature and battery temperature are monitored during charge cycle, and both current and voltage can be modified accordingly through I2C setting. The charger activity and status are reported through a dedicated pin to the system. The input pin is protected against overvoltages.
Features
 
  • 1.6 A buck converter with integrated pass devices
  • Input current limiting to comply to USB standard
  • 500mA boosted supply for USB OTG peripherals
  • Dynamic power path with external battery FET
  • High accuracy voltage and current regulation
  • Input over voltage protection up to +28 V
  • Reverse leakage protection prevents battery discharge
  • Protected USB Transceiver supply switch
  • Factory mode
  • Battery temperature sensing for safe operation (JEITA)
  • Flag output for charge status and interrupts
  • IC Control bus up to 3.4 MHz
  • Safety timers
  • Silicon temperature supervision for optimized charge cycle
Applications   End Products
  • High Efficiency Charging Line-up
 
  • Smart Phone
  • Handheld Devices
  • PDA
  • Tablets
Technical Documentation & Design Resources
Data Sheets (1) FAQ (1)
Package Drawings (1)  
Product
Status
Compliance
Description
Package
MSL
Container
Budgetary Price/Unit
Type
Case Outline
Type
Temperature
Type
Qty.
NCP1851AFCCT1G Obsolete
Pb-free
Halide free
NCP1851 Flip-Chip-25 499BN 1 260 Tape and Reel 3000  
NCP1851FCCT1G Obsolete
Pb-free
Halide free
NCP1851 Flip-Chip-25 499BN 1 260 Tape and Reel 3000  
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Case Outlines
499BN   
Packages
NCP1851: Switching Battery Charger, 1.6 A, with Power Path Management
NCP1851: Switching Battery Charger, 1.6 A, with Power Path Management
Previously Viewed Products
Clear List

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.