Offline Controllers | NCP1308

Controller, Free Running Quasi-Resonant Current Mode

Obsolete

Datasheet

Products

Overview

The NCP1308 combines a true current mode modulator and a demagnetization detector to ensure full borderline/Critical Conduction Mode in any load/line conditions and minimum drain voltage switching (Quasi-Resonant operation). Due to its inherent skip cycle capability, the controller enters burst mode as soon as the power demand falls below a predetermined level. As this happens at low peak current, no audible noise can be heard. An internal 10us timer prevents the free-run frequency to exceed a high frequency (therefore below the 150kHz CISPR-22 EMI starting limit), while the skip adjustment capability lets the user select the frequency at which the burst foldback takes place. The Dynamic Self-Supply (DSS) drastically simplifies the transformer design in avoiding the use of an auxiliary winding to supply the NCP1308. This feature is particularly useful in applications where the output voltage varies during operation (e.g. battery chargers). Thanks to its high-voltage technology, the IC is directly connected to the high-voltage DC rail. As a result, the short-circuit trip point is not dependent upon any VCC auxiliary level. The transformer core reset detection is done through an auxiliary winding which, brought via a dedicated pin. If an OVP has been detected on the Vcc pin, the IC permanently latches-off. Finally, the continuous feedback signal monitoring implemented with an over-current fault protection circuitry (OCP) makes the final design rugged and reliable.

  • ACDC Adapters for Notebooks, etc.
  • Offline Battery Chargers
  • Consumer Electronics (DVD Players, SetTop Boxes, TVs, etc.)
  • Auxiliary Power Supplies (USB, Appliances, TVs, etc.)

  • FreeRunning Borderline/Critical Mode QuasiResonant Operation
  • CurrentMode with Adjustable Skip Cycle Capability
  • Dynamic SelfSupply Type of VCC
  • AutoRecovery Overcurrent Protection
  • Improved UVLO for VCC below 10 VDevice Package Shipping
  • Latching Overvoltage Protection on VCC
  • 500 mA Peak Current Source/Sink Capability
  • Internal 1.0 ms SoftStart
  • Internal 10 us Minimum TOFF
  • Adjustable Skip Level
  • Internal Temperature Shutdown
  • Internal Leading Edge Blanking
  • Direct Optocoupler Connection
  • SPICE Models Available for TRANsient Analysis
  • This is a PbFree Device

Tools and Resources

Product services, tools and other useful resources related to NCP1308

CAD Model

CAD Model

Material Composition

Product Change Notification

Product List

If you wish to buy products or product samples, please log in to your onsemi account.

Search

Close Search

Products:

1

Share

Sort by

Product Groups:

┗

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Topology

Control Mode

fsw Typ (kHz)

Stand-by Mode

UVLO (V)

Short Circuit Protection

Latch

Soft Start

VCC Max (V)

Drive Cap. (mA)

Reference Price

NCP1308DR2G

Loading...

Obsolete

CAD Model

Pb

A

H

P

SOIC-8

751-07

1

260

REEL

2500

N

Flyback

Current Mode

Variable

Yes

Yes

Yes

Yes

Yes

16

500 / 500

Price N/A

More Details

Show More

1-25 of 25

Products per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with onsemi sales team.