Rate this webpage

FUSB302: Programmable USB Type-C Controller with PD

Datasheet: Programmable USB Type-C Controller w/PD
Rev. 2 (1292kB)
Product Overview
»View Reliability Data
»View Material Composition
» Product Change Notification

The FUSB302 targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability.

The FUSB302 enables the USB Type-C detection including attach, and orientation. The FUSB302 integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.

Reference code is available for the FUSB302 for easy implementation of Type-C and USB BMC Power Delivery protocol across several embedded controller platforms. Click on the Software link below.

  • Dual-Role Functionality with Autonomous DRP Toggle
  • Ability to connect as either a host or a device based on what has been attached.
  • Software configurable either as a dedicated host, dedicated device, or dual role
  • Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.
  • Full Type-C 1.1 Support. Integrates the following functionality of the CC pin
  • Attach/Detach Detection as Host
  • Current Capability Indication as Host
  • Current Capability Detection as Device
  • Audio Adapter Accessory Mode
  • Debug Accessory Mode
  • Active Cable Detection
  • Integrates CCx to VCONN switch with over-current limiting for powering USB3.1 Full Featured cables.
  • USB Power Delivery (PD) 2.0, Version 1.1 Support
  • Automatic GoodCRC Packet Response
  • Automatic soft reset packet sent with retries if needed
  • Automatic retries of sending a packet if a GoodCRC is not received
  • Dead Battery Support (SNK Mode Support when No Power Applied)
  • Automatic Hard Reset Ordered Set Sent
  • Packaged in 9-Ball WLCSP (1.260 mm x 1.215 mm) and 14-lead MLP (2.5 mm x 2.5 mm, 0.5 mm Pitch)
  • Low Power Operation: ICC = 25 μA (Typical)
  • This product is general usage and suitable for many different applications.
Budgetary Price/Unit
Case Outline
FUSB302MPX Active, Not Rec
Halide free
FUSB302 WQFN-14 510BR 1 260 Tape and Reel 3000 $0.4667
FUSB302UCX Active, Not Rec
Halide free
FUSB302 WLCSP-9 567SW 1 260 Tape and Reel 3000 $0.416
Market Leadtime (weeks) : 17 to 20
Market Leadtime (weeks) : 17 to 20
Case Outlines
510BR    567SW   
Previously Viewed Products
Clear List

New Products

FUSB308BV  USB-C™ Port Controller

  • Compatible with USB−PD Interface Specification Rev 1.0 Ver. 1.3
  • Supports up to 4 Type-C ports with selectable I2C addresses
  • Control for 2 source path load switch devices

Featured Video
New Standard - What is USB-C?
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.