The NCN8026A is a compact and cost-effective single SIM and smart card interface IC. It can be used with 1.8 V, 3 V and 5 V IC cards. The card VCC supply is provided by a built-in very low drop-out and low noise Regulator. The NCN8026A offers enhanced performances with low VCC output ripple under load-transient conditions, very low shutdown current and 1.8 V-to-5 V logic compatibility. This device is fully compatible with the ISO 7816-3, EMV 4.2, UICC and related standards including STB standards (Nagravision, Irdeto, Conax...). It satisfies the requirements specifying conditional access into Set-Top-Boxes (STB) or Conditional Access Modules (CAM). This smart card interface IC is available in a QFN-24 package providing all the industry-standard features usually required for STB smart card interface.
|
Features |
| |
|
|
|
-
Fully Compatible with ISO7816-3, EMV4.3, UICC and Related Standards Including STB Standards (Nagravision, Conax, Irdeto...)
|
-
Three Bidirectional Buffered I/O Level Shifters (C4, C7 and C8)
|
-
1.8 V, 3 V or 5 V ±5 % Regulated Card Power Supply with ICC ≤ 80 mA and Low VCC Ripple
|
-
Regulator Power Supply: VDDP = 2.7 V to 5.5 V (@ 1.8 V), 3 V to 5.5 V (@ 3 V) and 4.85 V to 5.5 V (@ 5 V)
|
-
Independent Power Supply range on Controller Interface such as VDD = 1.6 V to 5.5 V
|
-
Handles Class A, B and C Smart Cards
|
-
Support up to 27 MHz input Clock with Internal Division Ratio 1/1, 1/2, 1/4 and 1/8 through CLKDIV1 and CLKDIV2
|
-
HBM (Human Body Model) ESD Protection on Card Pins up to +8 kV
|
-
Activation / Deactivation Sequences (ISO7816 Sequencer)
|
-
Fault Protection Mechanisms Enabling Automatic Device Deactivation in Case of Overload, Overheating, Card Takeoff or Power Supply Dropout(OCP, OTP, UVP)
|
-
Interrupt Signal INT for Card Presence and Faults
|
-
Chip Select Pin (CS) for Dual Card Operating
|
-
External UnderVoltage Lockout Threshold Adjustment on VDD (PORADJ Pin)
|
