Analog Switches | FSUSB30

Low-Power 2-Port High-Speed USB 2.0 (480 Mbps) Switch

Last Shipments

Datasheet

Products

Overview

The FSUSB30 is a low-power, two-port, high-speed USB 2.0 switch. Configured as a double-pole double-throw (DPDT) switch, it is optimized for switching between two high-speed (480Mbps) sources or a Hi-Speed and Full-Speed (12Mbps) source. The FSUSB30 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 3.7pF. The wide bandwidth of this device (720MHz), exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk minimizes interference.
The FSUSB30 contains special circuitry on the D+/D- pins which allows the device to withstand an overvoltage condition when powered off. This device is also designed to minimize current consumption even when the control voltage applied to the S pin, is lower than the supply voltage (VCC). This feature is especially valuable to ultra-portable applications such as cell phones, allowing for direct interface with the general purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers.

  • Media Tablets
  • Storage & Peripherals
  • Mobile Handsets
  • Wireless LAN Card & Broadband Access
  • PMP/MP3 Players

  • Low On Capacitance: 3.7 pF (Typical)
  • Low On Resistance: 6.5 Ω (Typical)
  • Low Power Consumption: 1 µA (Maximum)
  • 10 µA Maximum ICCT over and Expanded Control Voltage Range (VIN=2.6 V, VCC=4.3 V)
  • Wide -3 dB bandwidth, >720 MHz
  • 8 kV ESD Protection
  • Power-Off Protection when VCC = 0 V, D+/D- pins can Tolerate up to 5.5 V

Tools and Resources

Product services, tools and other useful resources related to FSUSB30

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your onsemi account.

Search

Close Search

Products:

3

Share

Sort by

Product Groups:

┗

Orderable Parts:

3

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Channels

Number of Switches

Configuration

Icc Max (µA)

ron Max (Ω)

VCC Min (V)

VCC Max (V)

Reference Price

FSUSB30L10X

Loading...

Obsolete

CAD Model

Pb

A

H

P

UQFN-10

523AZ

1

260

REEL

5000

N

2

2

DPDT

1

10

3

4.3

Price N/A

More Details

FSUSB30MUX

Loading...

Last Shipments

CAD Model

Pb

A

H

P

MSOP-10

846AP

1

260

REEL

4000

N

2

2

DPDT

1

10

3

4.3

Price N/A

More Details

FSUSB30UMX

Loading...

Last Shipments

CAD Model

Pb

A

H

P

UQFN-10

523BC

1

260

REEL

5000

N

2

2

DPDT

1

10

3

4.3

Price N/A

More Details

Show More

1-25 of 25

Products per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with onsemi sales team.

Reliability Data

Die Related Summary Data

Device: FSUSB30L10X

Equivalent to wafer fab process: 32

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

32

1

1989480587

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search