IGBTs | FGBS3040_F085

Integrated Smart Ignition Coil Driver

Obsolete

Datasheet

Products

Overview

The FGBS3040E1_F085 is designed to directly drive an ignition coil and control the current and spark event of the coil. The coil current is controlled via the input/diagnostic pin. When the input is driven high, the IGBT is enabled to start charging the coil. The FGBS3040E1_F085 will sink a current (IIN1) into the input to denote this condition. When the collector current increases to Icthr the input current into the FGBS3040E1_F085 is reduced to IIN2 indicating the collector current has reached this level. An input filter suppresses input signals of less then 13 µsec in duration. A Max Dwell timer is included in the FGBS3040E1_F085 which will turn off the IGBT if the input stays active for longer then the programmed time. This time interval can be modified through an external capacitor. When the Max Dwell timer is exceeded, the FGBS3040E1_F085 will enter a Soft-Shut-Down mode (SSD) slowly dropping the collector current thereby discharging the coil such as to inhibit a spark event. Once the soft shutdown operation has started, any transitions on the input signal are ignored until after completion of the soft shutdown function. The FGBS3040E1_F085 will also limit the collector current of the IGBT to Ic(lim) during charging.

  • 400V 300mJ N Channel Ignition IGBT
  • Control Input buffering
  • Input spike filter of typical 13us
  • Operation from Ignition or Battery line
  • Ground shift tolerance +/- 1.5V
  • Programmable maximum dwell time
  • Current programmable bidirectional Input/Diagnostic pin
  • Collector Current limit typical 16.5A
  • Soft Shutdown of Collector Current after Max Dwell

Tools and Resources

Product services, tools and other useful resources related to FGBS3040_F085

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your onsemi account.

Search

Close Search

Products:

1

Share

Sort by

Product Groups:

┗

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Family

V(BR)CES Typ (V)

IC Max (A)

VCE(sat) Typ (V)

VF Typ (V)

Eoff Typ (mJ)

Eon Typ (mJ)

Trr Typ (ns)

Irr Typ (A)

Gate Charge Typ (nC)

Short Circuit Withstand (µs)

EAS Typ (mJ)

PD Max (W)

Co-Packaged Diode

Reference Price

FGBS3040E1-F085

Loading...

Obsolete

CAD Model

Pb

A

H

P

D2PAK-7 / TO-263-7

418AY

3

245

REEL

800

N

-

600

6.8

-

-

-

-

-

-

-

-

-

150

-

Price N/A

More Details

Show More

1-25 of 25

Products per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with onsemi sales team.

Reliability Data

Die Related Summary Data

Device: FGBS3040E1-F085

Equivalent to wafer fab process: IGN IGBT

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

IGN IGBT

12

24556821265

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search