Add "RF_RQn_RECEIVED_IRQn" in rm_event.c for Remote_mic_tx_raw

In rm_event.c of remote_mic_tx_raw, RM_Enable(offset) sets NVIC_EnableIRQ(RF_TX_IRQn) and then RF_TX_IRQHandler() can use RF_REG_READ(IRQ_STATUS) to judge RF_TX_IRQ for transmission done.

Whether we can also add NVIC_EnableIRQ(RF_RQn_RECEIVED_IRQn) in rm_event.c and then use a new RF_RX_IRQHandler() to judge data receiving done?Thanks.

If you’re making your own version of the remote_mic protocol, then yes you could do this.

1 Like