#Saber model for HUF75639P3, HUF75639G3, HUF75639S3, & HUF75639S3S
#.subckt huf75639p3  2 1 3      
#*nom temp=25 deg c 
#*14 oct 98
#*revA1 18July2008
template huf75639p3 n2,n1,n3
electrical n2,n1,n3
{
var i iscl
d..model dbodymod = (is=1.4e-12, xti=4.7, cjo=33e-10,tt=6.1e-8,m=0.6)
d..model dbreakmod = ()
d..model dplcapmod = (cjo=22e-10,is=1e-30,n=10,m=0.95,vj=1.0)
m..model mmedmod = (type=_n,vto=3.5,kp=4.8,is=1e-30, tox=1)
m..model mstrongmod = (type=_n,vto=3.97,kp=56.5,is=1e-30, tox=1)
m..model mweakmod = (type=_n,vto=3.11,kp=0.085,is=1e-30, tox=1) 
sw_vcsp..model s1amod =  (ron=1e-5,roff=0.1,von=-6.0,voff=-3.5)
sw_vcsp..model s1bmod =  (ron=1e-5,roff=0.1,von=-3.5,voff=-6.0)
sw_vcsp..model s2amod =  (ron=1e-5,roff=0.1,von=-2.5,voff=4.95)
sw_vcsp..model s2bmod =  (ron=1e-5,roff=0.1,von=4.95,voff=-2.5)
c.ca n12 n8 = 28.5e-10
c.cb n15 n14 = 26.5e-10
c.cin n6 n8 = 19e-10

d.dbody n7 n71 = model=dbodymod
res.rdbody n71 n5 =3.3e-3, tc1=2e-3, tc2=0.1e-5
d.dbreak n72 n11 = model=dbreakmod
res.rdbreak n72 n5 =3.5e-1, tc1=1e-3, tc2=1e-6
d.dplcap n10 n5 = model=dplcapmod

spe.ebreak n11 n7 n17 n18 = 110
spe.eds n14 n8 n5 n8 = 1
spe.egs n13 n8 n6 n8 = 1
spe.esg n6 n10 n6 n8 = 1
spe.evthres n6 n21 n19 n8 = 1
spe.evtemp n20 n6 n18 n22 = 1

i.it n8 n17 = 1
l.lgate n1 n9 = 1e-9
l.ldrain n2 n5 = 2.0e-9
l.lsource n3 n7 = 4.69e-10

res.rlgate n1 n9 = 10
res.rldrain n2 n5 = 20
res.rlsource n3 n7 = 4.69

m.mmed n16 n6 n8 n8 = model=mmedmod, l=1u, w=1u
m.mstrong n16 n6 n8 n8 = model=mstrongmod, l=1u, w=1u 
m.mweak n16 n21 n8 n8 = model=mweakmod, l=1u, w=1u    

res.rbreak n17 n18  = 1, tc1=.8e-3,tc2=1e-6
res.rdrain n50 n16  = 13e-3, tc1=1.0e-2,tc2=1.75e-5
res.rgate n9 n20 = 0.7
res.rslc1 n5 n51  = 1e-6, tc1=2.80e-3,tc2=14e-6
res.rslc2 n5 n50 = 1e3
res.rsource n8 n7  = 4.5e-3, tc1=0,tc2=0
res.rvthres n22 n8  = 1, tc1=-2e-3,tc2=-1.75e-5
res.rvtemp n18 n19  = 1, tc1=-2.75e-3,tc2=0.05e-9
sw_vcsp.s1a n6 n12 n13 n8 = model=s1amod
sw_vcsp.s1b n13 n12 n13 n8 = model=s1bmod
sw_vcsp.s2a n6 n15 n14 n13 = model=s2amod
sw_vcsp.s2b n13 n15 n14 n13 = model=s2bmod
v.vbat n22 n19 = dc=1
equations {
i (n51->n50) +=iscl
iscl: v(n51,n50) = ((v(n5,n51)/(1e-9+abs(v(n5,n51))))*((abs(v(n5,n51)*1e6/115))** 4))
}
}
#
#*thermal model subcircuit
#.subckt huf75639p3_thermal junction ambient
#
template thermal_model th tl
thermal_c th, tl
{
ctherm.ctherm1 th c2 =2.8e-3	   
ctherm.ctherm2 c2 c3 =4.6e-3
ctherm.ctherm3 c3 c4 =5.5e-3
ctherm.ctherm4 c4 c5 =9.2e-3
ctherm.ctherm5 c5 c6 =1.7e-2
ctherm.ctherm6 c6 tl =4.3e-2

rtherm.rtherm1 th c2 =5.0e-4
rtherm.rtherm2 c2 c3 =1.5e-3
rtherm.rtherm3 c3 c4 =2.0e-2
rtherm.rtherm4 c4 c5 =9.0e-2
rtherm.rtherm5 c5 c6 =1.9e-1
rtherm.rtherm6 c6 tl =2.9e-1
}