#Saber model for HUF75344P3, HUF75344G3 & HUF75344S3S
#.subckt huf75344p3 2 1 3
# rev 3Feb98
template huf75344p3 n2,n1,n3
electrical n2,n1,n3
{
var i iscl
dp..model dbodymod =  (isl=2.95e-12,rs=2.6e-3,trs1=1.05e-3,trs2=5e-7,cjo=5.19e-9,tt=5.9e-8,m=0.55)
dp..model dbreakmod = (rs=1.65e-1,ikf=30,trs1=1.15e-4,trs2=2.27e-6)
dp..model dplcapmod =  (cjo=5.40e-9,isl=10e-30,nl=1,m=0.88,)
m..model mmedmod = (type=_n,vto=3.29,kp=5.5,is=1e-30, tox=1)
m..model mstrongmod = (type=_n,vto=3.83,kp=123,is=1e-30, tox=1)
m..model mweakmod = (type=_n,vto=2.9,kp=0.04,is=1e-30, tox=1)
sw_vcsp..model s1amod =  (ron=1e-5,roff=0.1,von=-6.9,voff=,-3.9)
sw_vcsp..model s1bmod =  (ron=1e-5,roff=0.1,von=-3.9,voff=,-6.9)
sw_vcsp..model s2amod =  (ron=1e-5,roff=0.1,von=-2.99,voff=,2.39)
sw_vcsp..model s2bmod =  (ron=1e-5,roff=0.1,von=2.39,voff=,-2.99)
c.ca n12 n8 = 4.9e-9
c.cb n15 n14 = 4.75e-9
c.cin n6 n8 = 2.85e-9

dp.dbody n7 n5 = model=dbodymod
dp.dbreak n5 n11 = model=dbreakmod
dp.dplcap n10 n5 = model=dplcapmod

spe.ebreak n11 n7 n17 n18 = 59.7
spe.eds n14 n8 n5 n8 = 1
spe.egs n13 n8 n6 n8 = 1
spe.esg n6 n10 n6 n8 = 1
spe.evthres n6 n21 n19 n8 = 1
spe.evtemp n20 n6 n18 n22 = 1

i.it n8 n17 = 1

l.lgate n1 n9 = 2.6e-9
l.ldrain n2 n5 = 1e-9
l.lsource n3 n7 = 1.1e-9

res.rlgate n1 n9 = 26
res.rldrain n2 n5 = 10
res.rlsource n3 n7 = 11

m.mmed n16 n6 n8 n8 = model=mmedmod, l=1u, w=1u
m.mstrong n16 n6 n8 n8 = model=mstrongmod, l=1u, w=1u
m.mweak n16 n21 n8 n8 = model=mweakmod, l=1u, w=1u

res.rbreak n17 n18  = 1, tc1=1.15e-3,tc2=2e-7
res.rdrain n50 n16  = 1.94e-3, tc1=1.37e-2,tc2=3.85e-5
res.rgate n9 n20 = 0.36
res.rslc1 n5 n51  = 1e-6, tc1=1.45e-4,tc2=2.11e-6
res.rslc2 n5 n50 = 1e3
res.rsource n8 n7  = 3.5e-3, tc1=0,tc2=0
res.rvthres n22 n8  = 1, tc1=-3.7e-3,tc2=-1.6e-5
res.rvtemp n18 n19  = 1, tc1=-2.4e-3,tc2=7e-7

sw_vcsp.s1a n6 n12 n13 n8 = model=s1amod
sw_vcsp.s1b n13 n12 n13 n8 = model=s1bmod
sw_vcsp.s2a n6 n15 n14 n13 = model=s2amod
sw_vcsp.s2b n13 n15 n14 n13 = model=s2bmod

v.vbat n22 n19 = dc=1
equations {
i (n51->n50) +=iscl
iscl: v(n51,n50) = ((v(n5,n51)/(1e-9+abs(v(n5,n51))))*((abs(v(n5,n51)*1e6/400))** 3))
}
}
#
#*thermal model subcircuit
#*5feb99
#.subckt huf75344p3_thermal th tl
#
template thermal_model th tl
thermal_c th, tl
{
ctherm.ctherm1 th c2 =5.0e-3	   
ctherm.ctherm2 c2 c3 =1.0e-2
ctherm.ctherm3 c3 c4 =1.3e-2
ctherm.ctherm4 c4 c5 =1.5e-2
ctherm.ctherm5 c5 c6 =2.2e-2
ctherm.ctherm6 c6 tl =8.5e-2

rtherm.rtherm1 th c2 =6.0e-4
rtherm.rtherm2 c2 c3 =3.5e-3
rtherm.rtherm3 c3 c4 =2.5e-2
rtherm.rtherm4 c4 c5 =4.8e-2
rtherm.rtherm5 c5 c6 =1.6e-1
rtherm.rtherm6 c6 tl =1.8e-1
}