* OrCAD Model Editor - Version 9.1
*$
.SUBCKT FDMC6675BZ 2 1 3   
*Nom Temp=25 deg C
Dbody 5 7 DbodyMOD
Dbreak 7 11 DbreakMOD
Ebreak 5 11 17 7 -33
Lgate 1 9 1.625e-9
Ldrain 2 5 0.005e-9 
Lsource 3 7 0.212e-9
RLgate 1 9 16.25
RLdrain 2 5 0.05
RLsource 3 7 2.12
Rgate 9 6 4.57
It 7 17 1
Rbreak 17 7 RbreakMOD 1
.MODEL RbreakMOD RES (TC1=0.7e-3 TC2=-0.4e-6)
.MODEL DbodyMOD D(IS=1.59e-12 n=1 RS=1.48e-2 TRS1=5e-5 TRS2=1e-6
+ CJO=0.441e-9 M=0.6 TT=0.0001e-9 XTI=2.5)
.MODEL DbreakMOD D(RS=100e-3 TRS1=1e-3 TRS2=1e-6)
Rdrain 5 16 RdrainMOD 8.85e-3 
.MODEL RdrainMOD RES (TC1=3.5e-3 TC2=5e-6)
M_BSIM3 16 6 7 7 M_MOD W=4.492 L=1.1e-6 NRS=0 
.MODEL  M_MOD PMOS (LEVEL=7 VERSION=3.1 MOBMOD=3 CAPMOD=2 paramchk=1 NQSMOD=0)
**Process Parameters
+ TOX=550e-10 ;Oxide thickness
+ XJ=0.3e-6 ;Channel depth 
+ NCH=1.36e17 ;Channel concentration
**Channel Current
+ U0=250 vsat=8e5 drout=1.8 
+ DELTA=0.4 PSCBE2=0.00001 RSH=0.442e-3
***Threshold voltage
+ VTH0=-2.15
***Sub-threshold characteristics
+ VOFF=-0.16 NFACTOR=1
***Junction diodes and Capacitance
+ LINT=0.3e-6 DLC=0.3e-6 
+ CGSO=125e-12 CGSL=0 CGDO=35e-12 CGDL=396e-12 
+ CJ=0 CF=0p CKAPPA=0.55
*** Temperature parameters
+ KT1=-1.3 KT2=0 UA1=7e-9
+ NJ=10 
.ENDS 
*FDMC6675BZ(Rev.A) 10/8/08
*ST
*$