NCP360GEVB:  USB Positive OVP Evaluation Board

NCP360 is able to disconnect the systems from its output pin incase wrong VBUS operating conditions is detected.The systemis positive overvoltage protected up to +20V. Thanks to this device using internal PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board. NCP360 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold (OVLO). NCP360 provides a negative going flag output, which alerts the system that a fault has occurred.In addition, the device has ESD protected input (15kV Air) when bypassed with a 1µF or larger capacitor.
Features and Applications


  • Overvoltage Lockout (OVLO)
  • Undervoltage Lockout (UVLO)
  • Very Fast Protection, Up to 20 V, with 25 uA Current Consumption
Evaluation/Development Tool Information
Product Status Compliance Short Description Parts Used Action
NCP360GEVB Active
USB Positive OVP Evaluation Board NCP360MUTBG
Technical Documents
Type Document Title Document ID/Size Rev
Eval Board: BOM NCP360GEVB Bill of Materials ROHS Compliant NCP360GEVB_BOM_ROHS.PDF - 179.0 KB  0 
Eval Board: Gerber NCP360GEVB Gerber Layout Files (Zip Format) NCP360GEVB_GERBER.ZIP - 43.0 KB  0 
Eval Board: Schematic NCP360GEVB Schematic NCP360GEVB_SCHEMATIC.PDF - 118.0 KB  0 
Eval Board: Test Procedure NCP360GEVB Test Procedure NCP360GEVB_TEST_PROCEDURE.PDF - 150.0 KB  0 
Video USB Positive OVP Evaluation Board - NCP360GEVB WVD17589/D   
Previously Viewed Products
Clear List

Featured Video
USB Positive OVP Evaluation Board - NCP360GEVB
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.