feedback
Rate this webpage

Need
Support?


NCP3712ASN: Overvoltage Protected High Side Switch

Overview
Specifications
Packages
Datasheet: Over Voltage Protected High Side Switch
Rev. 8 (57kB)
»View Material Composition
»Product Change Notification (5)
Product Overview
Product Description
This Overvoltage Protected High Side Switch is primarily intended to protect loads from transients by isolating the load from the transient energy rather than absorbing it.
Features
 
  • Capable of Switching Loads of up to 200 mA without External Rboost
  • Switch Shuts Off in Response to an Over Voltage Input Transient
  • Features Active Turn Off for Fast Input Transient Protection
  • Flexible Over Voltage Protection Threshold Set with External Zener
  • Automatic Recovery after Transient Decays Below Threshold
  • Withstands Input Transients up to 105 V Peak
  • Guaranteed Off State with Enblbar Input
  • ESD Resistant in Accordance with the 2000 V Human Body Model
  • Extremely Low Saturation Voltage
  • Pb-Free Packages are Available
Applications
  • High Voltage Transient Isolation
  • Power Switching to Electronic Modules
  • DC Power Distribution in Line Operated Equipment
  • Buffering Sensitive Circuits from Poorly Regulated Power Supplies
  • Pre-conditioning of Voltage Regulator Input Voltage
Technical Documentation & Design Resources
Data Sheets (1) Package Drawings (2)
Availability and Samples
Product
Status
Compliance
Description
Package
MSL*
Container
Budgetary Price/Unit
Type
Case Outline
Type
Qty.
NCP3712ASNT1G Active
Pb-free
Halide free
Overvoltage Protected High Side Switch SC-74 318F-05 1 Tape and Reel 3000 $0.168
NCP3712ASNT3G Active
Pb-free
Halide free
Overvoltage Protected High Side Switch SC-74 318F-05 1 Tape and Reel 10000 $0.168
SZNCP3712ASNT1G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Overvoltage Protected High Side Switch TSOP-6 318G-02 1 Tape and Reel 3000 $0.1848
SZNCP3712ASNT3G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Overvoltage Protected High Side Switch TSOP-6 318G-02 1 Tape and Reel 10000 $0.2053
Moisture Sensitivity level (MSL) for surface mount devices (lead free measured at 260°C reflow, non lead free at 235°C reflow)
Market Leadtime (weeks) : 2 to 4
Avnet   (2015-07-09) : >1K
Mouser   (2015-07-09) : >1K
ON Semiconductor   (2015-07-08) : 78,000
Market Leadtime (weeks) : 2 to 4
ON Semiconductor   (2015-07-08) : 120,000
Market Leadtime (weeks) : 4 to 8
Market Leadtime (weeks) : 2 to 4
FutureElectronics   (2015-07-09) : >100K
Datasheet: Over Voltage Protected High Side Switch
Rev. 8 (57kB)
»View Material Composition
»Product Change Notification (5)
Product Overview

Product Compliance Status Description VCC Min (V) VCC Max (V) P(AV) Max (W) VIT+ Typ (V) VIT Typ (V) IDDH Max (uA) TA Min (°C) TA Max (°C) Package Type
 Pb-free 
 Halide free 
 Active     Overvoltage Protected High Side Switch               -40   85   SC-74 
 Pb-free 
 Halide free 
 Active     Overvoltage Protected High Side Switch               -40   85   SC-74 
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     Overvoltage Protected High Side Switch               -40   85   TSOP-6 
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     Overvoltage Protected High Side Switch               -40   85   TSOP-6 
Previously Viewed Products
Clear List

New Products
 

LC05132C01NMT  Battery Protection Controller with Integrated MOSFET, 1-Cell Lithium-Ion

  • Highly accurate detection voltage/current at Ta = Tj = 25°C, VCC = 3.7 V
  • Low impedance reduces heat dissipation
  • Reset function