NCP1608: PFC Controller, Critical Conduction Mode, with a Transconductance Error Amplifier

Overview
Specifications
Packages
Applications
Datasheet: Critical Conduction Mode PFC Controller Utilizing a Transconductance Error Amplifier
Rev. 4 (189kB)
»View Material Composition
»Product Change Notification (2)
Product Overview
Product Description
The NCP1608 is an active power factor correction (PFC) controller specifically designed for use as a pre-converter in ac-dc adapters, electronic ballasts, and other medium power off-line converters (typically up to 350 W). It uses Critical Conduction Mode (CrM) to ensure near unity power factor across a wide range of input voltages and output power. The NCP1608 minimizes the number of external components by integrating safety features, making it an excellent choice for designing robust PFC stages.
Features   Benefits
     
  • No Input Voltage Sensing Requirement
 
  • Reduced Standby Power Dissipation
  • High Precision Voltage Reference (±1.6% Over the Temperature Range)
 
  • Accurate Output Voltage Regulation
  • Wide Control Range for High Power Application (>150 W) Noise Immunity
 
  • Improved Noise Immunity
  • Integrated Undervoltage and Overvoltage Protection
 
  • Open/Floating Feedback Loop Protection
  • Pin-to-Pin Compatible with Industry Standards
 
  • Second Source
  • Accurate and Programmable On Time Limitation
 
  • Accurate Maximum Output Power Limitation
  • Transconductance Error Amplifier
   
  • Very Low Startup Current Consumption (< 35 µA)
   
  • Low Typical Operating Current Consumption (2.1 mA)
   
  • Source 500 mA / Sink 800 mA Totem Pole Gate Driver
   
  • Undervoltage Lockout with Hysteresis
   
  • Overcurrent Protection
   
  • This is a Pb-Free and Halide-Free Device
   
Applications   End Products
  • Any Power Factor Correction Stage Less Than 350 W
 
  • Solid State Lighting
  • Electronic Light Ballast
  • AC Adapters
  • TVs and Monitors
  • All Off-Line Appliances Requiring Power Factor Correction
  • TVs and Monitors
Technical Documentation & Design Resources
Design & Development Tools (1) Package Drawings (1)
Application Notes (2) Videos (1)
Simulation Models (2) Evaluation Board Documents (5)
Data Sheets (1)  
Evaluation/Development Tool Information
Product Status Compliance Short Description Action
NCP1608BOOSTGEVB Active
Pb-free
100 W Boost Evaluation Board
Avnet  (2014-10-21) : 2
Mouser  (2014-10-21) : 4
Digi-Key  (2014-10-21) : 2
Availability and Samples
Product
Status
Compliance
Description
Package
MSL*
Container
Budgetary Price/Unit
Type
Case Outline
Type
Qty.
NCP1608BDR2G Active
Pb-free
Halide free
PFC Controller, Critical Conduction Mode, with a Transconductance Error Amplifier SOIC-8 751-07 1 Tape and Reel 2500 $0.2
Moisture Sensitivity level (MSL) for surface mount devices (lead free measured at 260°C reflow, non lead free at 235°C reflow)
Market Leadtime (weeks) :
Digi-Key   (2014-10-21 00:00) : >1K
Mouser   (2014-10-21 00:00) : >1K
P&S   (2014-10-21 00:00) : <1K
Datasheet: Critical Conduction Mode PFC Controller Utilizing a Transconductance Error Amplifier
Rev. 4 (189kB)
»View Material Composition
»Product Change Notification (2)
Product Overview

Product Compliance Status Description PFC Mode Frequency Operation Control Mode Topology fSW Typ (kHz) VCC Max (V) Drive Cap. (mA) UVLO (V) Latch UVP Inhibition Package Type
 Pb-free 
 Halide free 
 Active     PFC Controller, Critical Conduction Mode, with a Transconductance Error Amplifier   CRM   Variable   Voltage Mode   Step-Up   Variable   20   500 / 800   9.5 - 12   No   Yes   No   SOIC-8 
Previously Viewed Products
Clear List

New Products
 

NCL30030  Power Factor Correction & Quasi-Resonant Flyback Controller for LED Lighting

  • Wide VCC Range from 9 V to 30 V with Built−in Overvoltage
  • 700 V Rated High Voltage Startup Circuit
  • Integrated High−Voltage Brown−Out Detector