feedback
Rate this webpage

Need
Support?


NCN5193: HART CMOS Modem

Overview
Specifications
Datasheet: HART Modem
Rev. 1 (192kB)
»View Material Composition
»No Product Change Notifications exist
Product Overview
Product Description
The NCN5193 is a single-chip, CMOS modem for use in highway addressable remote transducer (HART) field instruments and masters. The modem and a few external passive components provide all of the functions needed to satisfy HART physical layer requirements including modulation, demodulation, receive filtering, carrier detect, and transmit-signal shaping. In addition, the NCN5193 also has an integrated DAC for low-BOM current loop slave transmitter implementation. The NCN5193 uses phase continuous frequency shift keying (FSK) at 1200 bits per second. To conserve power the receive circuits are disabled during transmit operations and vice versa. This provides the half-duplex operation used in HART communcations.
Features   Benefits
     
  • Low Power
 
  • Optimal for Intrinsically Safe Applications
  • Single-chip, Half-duplex 1200 Bits per Second FSK Modem
   
  • Bell 202 Shift Frequencies of 1200 Hz and 2200 Hz
   
  • Transmit - signal Wave Shaping
   
  • Receive Band - pass Filter
   
  • Internal Oscillator Requires 460.8 kHz, 920 kHz or 1.8 MHz Crystal or Ceramic Resonator
   
  • SPI Communication
   
  • Integrated 16 bit Sigma-Delta DAC
   
  • Meets HART Physical Layer Requirements
   
  • Industrial Temperature Range of -40°C to +85°C
   
  • Available in 32-pin NQFP Package
   
  • These are Pb-Free Devices
   
  • 1.8 V - 3.5 V Power Supply
   
  • Compatible with 1.8 V or 3.3 V Microcontroller
   
Applications
  • HART Multiplexers
  • HART Modem Interfaces
  • 4-20 mA Loop Powered Transmitters
Technical Documentation & Design Resources
Data Sheets (1) Evaluation Board Documents (5)
Package Drawings (1)  
Evaluation/Development Tool Information
Product Status Compliance Short Description Action
NCN5193GEVB Active
HART CMOS Modem Evaluation Board
Availability and Samples
Product
Status
Compliance
Description
Package
MSL*
Container
Budgetary Price/Unit
Type
Case Outline
Type
Qty.
NCN5193MNTWG Active
Pb-free
Halide free
HART CMOS Modem NQFP-20 560AK 3 Tape and Reel 5000 $3.4532
Moisture Sensitivity level (MSL) for surface mount devices (lead free measured at 260°C reflow, non lead free at 235°C reflow)
Market Leadtime (weeks) : 13 to 16
Datasheet: HART Modem
Rev. 1 (192kB)
»View Material Composition
»No Product Change Notifications exist
Product Overview

Product Compliance Status Description Data Transmission Standard Data Rate Number of Drivers Number of Receivers VCC Min (V) VCC Max (V) tPLH Max (µs) IO Max (µA) IIH Max (mA) Package Type
Pb-free
Halide free
 Active     HART CMOS Modem 
HART
1200 baud
1
1
1.8
3.5
0.02
550
 
NQFP-20
Datasheet: HART Modem
Rev. 1 (192kB)
»View Material Composition
»No Product Change Notifications exist
Product Overview
Case Outlines
560AK   
Datasheet: HART Modem
Rev. 1 (192kB)
»View Material Composition
»No Product Change Notifications exist
Product Overview
Previously Viewed Products
Clear List

Associated Products
  Do you also need ESD Protection Diodes?