NCV73830V1GEVB: Single−Channel FlexRay™ Bus Driver Evaluation Board

Evaluation/Development Tool Description

NCV73830V1GEVB evaluation board is a single-channel FlexRay™ bus driver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side. The products featured mode control functionality is optimized for nodes without the need of extended power management provided by transceivers with permanent connection to the car battery as is on the NCV7381. Offering excellent Electromagnetic compatibility (EMC) and Electrostatic discharge (ESD) performance, the NCV7383 part is primarily intended for nodes switched off by ignition.

In addition, NCV73830V1GEVB evaluation board provides High Speed CAN interface (NCV7340) that allows further expansion to a hybrid network topology.
Evaluation/Development Tool Information
Product Status Compliance Short Description Parts Used Action
NCV73830V1GEVB Active
Pb-free
Single−Channel FlexRay™ Bus Driver Evaluation Board NCV7383DB0R2G
Avnet (2014-09-19) : 2
Technical Documents
Type Document Title Document ID/Size Rev
Eval Board: Manual NCV73830V1GEVB Manual EVBUM2172/D - 4946.0 KB  1 
Eval Board: BOM NCV73830V1GEVB Bill of Materials ROHS Compliant NCV73830V1GEVB_BOM_ROHS.PDF - 62 KB  1 
Eval Board: Gerber NCV73830V1GEVB Gerber Layout Files (Zip Format) NCV73830V1GEVB_GERBER.ZIP - 304.0 KB  0 
Eval Board: Schematic NCV73830V1GEVB Schematic NCV73830V1GEVB_SCHEMATIC.PDF - 254.0 KB  0 
Eval Board: Test Procedure NCV73830V1GEVB Test Procedure NCV73830V1GEVB_TEST_PROCEDURE.PDF - 574.0 KB  0 
Software NCV73830V1GEVB Firmware NCV73830V1GEVB_FIRMWARE.ZIP - 3542 KB  1 
Video Transceiver Solutions with the NCV73830V1GEVB Evaluation Board TND6101/D  1 
Previously Viewed Products
Clear List